Email Address:
  Forgot Password? - Motorsport and Racing Website Design
Like us on Facebook

BMW E34 Touring - Camber Plates
Product SKU #cpe34touring
BMW E34 Touring - Camber Plates
Click for larger image
regular price: $399.00
Our Price: $349.00 per Pair


Availability: Usually ships in 24 hrs.



These plates feature over 23mm of total camber adjustment (16mm negative/7.5mm positive), with the ability to make corrective caster changes to equalize side-to-side caster in the stock position.

Other features include replaceable waterproof German axial load bearings, and urethane bushings for long life, less deflection, and a smooth silent ride on either stock, or 2.5" racing springs.

Our camber plates are also engraved with the Ground Control logo in an arch which can be used to locate the plate in the stock position for easy, repeatable, adjustment from street to track and back.

All components are anodized or zinc plated for corrosion resistance.

We also offer our lifetime guaranty! (Bearings not included)

A clean sheet design for street cars, not an adapted spherical race plate.
Waterproof, German-made, axial load steering bearings.
Allows for up to 23.5mm total camber adjustment. (16mm negative - 7.5mm positive)
Unique slot design allows for caster correction.
Revolutionary caster adjustment can be locked or unlocked.
Urethane center mounts reduce NVH, yet do not flex.
All components plated or anodized for corrosion resistance.
Zinc plated mounting bracket for ease of install and adjustment.
Available for stock diameter, 60mm or 2.5 inch springs

What this means:
...for the large bore Touring camber/caster plate (16 to 14)

Spring height:
19mm stock e34 with no spring pad, and no spring pad on GC raises car 7mm
27mm stock e34 with typical 2 dot spring pad on e34, and skinny spring pad on GC (raises car 0 mm)
27mm stock e34 with typical 2 dot spring pad on e34, and no spring pad on GC lowers car 1mm
26mm GC with aluminum upper perch and bearing block with no spring pad

Block height (bump travel):
51mm GC to lower base of taper with thick bushing underneath, adds 5mm travel
46mm GC to lower base of taper with thin bushing underneath, adds 10mm travel, may be tight fit above ccp
56mm stock to lower base of taper.

What this means:
...for the small bore Touring camber/caster plate (14 to 14)

Spring height:
Stock 31mm with no pad
Stock 32mm with skinny pad
GC 25mm with no pad, lowers car 6mm
GC 33mm with two dot pad, stock height

Block height (bump travel):
56mm Stock from shoulder
40mm GC from shoulder, with short bushing on stock shaft

Which version do you currently have?

14mm-14mm on the car. (click for larger image)

16mm-14mm on the car. (click for larger image)

Official Ground Control T-Shirt
Official Ground Control T-Shirt
Regularly: $24.00

All Ground Control products carry a lifetime guarantee against defects when installed and maintained correctly. We strongly recommend that all of our products be installed by a competent, qualified mechanic.

  F.A.Q.   Contact Us   |   Privacy Policy   Terms and Conditions   Webmaster  

Phone: 530-677-8600 | Fax: 530-677-9090 | Hours: M-F 9-5 PST

"Ground Control" is a registered trademark of Ground Control Systems Inc.

Welcome to

THE Suspension Specialists!


Honda Tech Special Kit

E39 M5, Complete Coilover Kit

2005-up Mustang Street Camber Plate (Pair)

M Coupe - Full Coilover Kit

924/944/951/968 Double-Adj. Complete Strut Assemblies w/Rear C/O Shocks - Kit #8

Ground Control
for ALL your


88-00 Civic, 90-01 Integra upper mounts (Pair)

Camber Plate - E39 M5 (Pair)

E46M3 Racing Swaybar Set (Front & Rear)

Complete Coilover Kit, E46 Race/Track - Completely Assembled

BMW Race Mount (Pair)

This is...

official source for the best in suspension systems.

Sway Bar End Link, Adjustable (Pair)

Coilover Conversion kit, 02- Acura RSX

Camber/Caster Plates
BMW E90 ( 2006-Up 3 Series) (Pair)

MZ4 (not regular Z4) Track School Kit Plus

Honda Mount - Race (pair)

or concerns?

Call us at:

(Mon.- Fri.
9am to 5pm pst)

Click items
for more info.

Want Custom Colors???
Click here
for more info.