This full kit fits 92-96 Mitsubishi Evo's.
THIS KIT INCLUDES THE FOLLOWING: (click items for details)
Complete Front Strut Housing - Custom machined and fabricated from seamless DOM 1026 steel alloy tubing. Powdercoated to customer's desired color choice. High clearance sway bar bracket welded on.
Koni Single Adjustable Front Strut - Struts are externally adjustable from underneath the hood, even with the factory strut brace. This strut is prepared for coil over use, and eliminates machining of critical suspension components.
Ground Control Threaded Sleeves - This system is designed to eliminate stress risers caused by machining notches into the strut housing. Unlike other companies that claim superiority by cutting threads into a critical component of the suspension, Ground Control uses engineering common sense to maximize the strength of the suspension.
Ground Control Adjustable Spring Perch - A unique design, that uses an allen head bolt to clamp the single threaded perch into the correct position. No secondary pieces are needed to "jam" the threaded perch into position. This method of clamping onto the threads also prevents sand, grit, and water from getting into the threads, which is a common problem with jam nuts.
Complete Front Strut Housing - Machined from seamless DOM 1026 steel alloy tubing. High clearance sway bar bracket welded on.
Eibach Springs - All popular street spring rates are available. Ground Control springs are made by Eibach on German machines both in the USA and in Germany, however all Eibach springs have a lifetime guarantee against sagging, rate change, or any manufacturing or material failure. Lifetime guarantee. Compare!
Ground Control Bump Stops - We do not just ask you to reuse your stock bump. The stock bump stop is designed for stock suspension we provide a bump stop designed to work with our suspension. These are soft foam, same quality as OEM BMW parts, but made to our specs in Germany. Our race bump stops are even different than our street bump stops.
Ground Control Top Mount Camber/Caster Plates - More camber adjustment than stock. Ground Control designed bushings, engraved with calibrated degrees. Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product. The steering bearing is sealed for long life.
Camber and caster are quickly adjustable by sliding the mounts, without removing any components from the car. The priority of this design is to allow repeatable alignment changes for fine tuning.
*Suspension is shipped completely assembled and preadjusted*
All Ground Control products carry a lifetime guarantee against defects when
installed and maintained correctly. We strongly recommend that all of our products be installed by a competent, qualified mechanic.