Email Address:
  Forgot Password? - Motorsport and Racing Website Design
Like us on Facebook

BMW 75-83 320i E21 Complete Coilover Suspension Kit
Product SKU #2010.73
BMW 75-83 320i E21 Complete Coilover Suspension Kit
Click for larger image
regular price: $1699.00
Our Price: $1499.00 


Availability: Made to Order



Ride Feel Options
In the drop-down menu next to the image of the product, please select from the following choices:
Select Option "1" = Street Ride 1. (with clients and/or wife)
Select Option "2" = Street Ride 2. (with friends and/or dates)
Select Option "3" = Sport Ride. (1 track day a year)
Select Option "4" = Hot Rod. (surprise a Vette)
Select Option "5" = Frequent Track Visits. (race spring rates - call us)
Shortened Front Strut Housings
In the drop-down menu next to the image of the product, please select from the following choices:
Select Option "A" = If you would like stock length front struts. (no welding/cutting)
Select Option "B" = If you would like to modify your own struts.
Select Option "C" = If you would like Ground Control to shorten/powder coat your struts.

(removal of stock spring seat and welding optional for added tire clearance and range of adjustment, directions included)
  • Expected ride height change from 0 to 2 inches. Lower than 2 inches can cause rear alignment problems.

Ground Control Coilover Kits

This coil-over kit gives you the option to customize the ride height of your vehicle. After several years of use in racing applications, Ground Control spring kits have been adapted for street use. Most other spring kits offer only one set ride height when installed. The Ground Control system's unique design allows for easy adjustment. Simply lift the corner(s) of the vehicle that you wish to adjust and spin the adjustable spring seat up or down to raise or lower the vehicle*. Ground Control spring kits are also designed to be used with either stock or aftermarket shocks.

Springs: All of our ride height adjustable kits now exclusively feature Ground Control springs, manufactured by Eibach USA. A broad selection of street spring rates are available. All Eibach / GC springs offer a lifetime warranty against spring rate change and sagging.

Adjusters: All adjusters consist of a threaded sleeve and adjustable spring seat. And are made using high strength 6061-T6 aluminum; anodized for greater durability and appearance. The threads on the adjusters are square cut which locks the adjustable spring seat in place under load. For further precaution, a setscrew in the adjustable spring seat can be used to secure adjustment. Upper spring perches are used to insulate the spring.
Rear upper shock mounts: Billet aluminum rear upper mounts eliminate the failure prone stock pieces. Bumps stops are provided and assembled. Urethane upper spring pads are used to insulate the spring.
Bump Stops: This kit includes four Ground Control bumpstops, designed and manufactured for GC, andmatched to your springs.
Camber Plates: HYBRID Camber / Caster Plates A special version of our camber/caster plates, toned down for dual-purpose cars. Uses a proprietary upper perch with a urethane spring insulator. More camber adjustment than stock, caster adjustment, aircraft bearings, engraved with calibrated degrees. Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product. .
Camber and caster are separately adjustable by sliding the mounts, without removing any components from the car.
The Ground Control camber plates feature two sets of bearings, a proprietary bearing, made to our specs by Aurora in the USA, which allows for articulation of the shock shaft. This spherical bearing is very understressed, as the GC design does NOT support the weight of the car on the spherical bearing. Instead, the weight of the car is supported by a completely separate articulating needle bearing, which is also manufactured for Ground Control in the USA.
(the camber plates were formerly an option, now they are standard equipment at a lower price)
Ground Control works very hard with Eibach USA to make these springs to the standards that you demand. Lifetime guarantee on everything, not just springs. No excuses about "racing" or "special". If anything fails, while being correctly installed, it will be taken care of, period. We can only have a guarantee like this because every single part of the Ground Control Street coil-over kit is made by us or someone we trust.
The shocks and struts in this kit are not the standard off-the-shelf Koni struts for the e21. The front struts are adjustable and are shortened with special valving designed by Ground Control. The rear shocks have a slightly more aggressive, but still streetable damping like the front struts.

Option 1: This kit is priced to use either a shortened front strut or standard length front strut. There is no PARTS price difference, however there is labor involved. GC can provide directions for you to prepare your front strut housings yourself, or GC can convert to coil-over, shorten, reinforce, and powder-coat your strut housings for $210 a pair. If you choose to have us modify and reienforce your existing housings, you must send in your housings to Ground Control or call us directly for the current availibility if core housings on hand (core charge additional). Top adjust Konis are only available with this option.

Official Ground Control T-Shirt
Official Ground Control T-Shirt
Regularly: $24.00

All Ground Control products carry a lifetime guarantee against defects when installed and maintained correctly. We strongly recommend that all of our products be installed by a competent, qualified mechanic.

  F.A.Q.   Contact Us   |   Privacy Policy   Terms and Conditions   Webmaster  

Phone: 530-677-8600 | Fax: 530-677-9090 | Hours: M-F 9-5 PST

"Ground Control" is a registered trademark of Ground Control Systems Inc.

Welcome to

THE Suspension Specialists!


Honda Tech Special Kit

E39 M5, Complete Coilover Kit

2005-up Mustang Street Camber Plate (Pair)

M Coupe - Full Coilover Kit

924/944/951/968 Double-Adj. Complete Strut Assemblies w/Rear C/O Shocks - Kit #8

Ground Control
for ALL your


88-00 Civic, 90-01 Integra upper mounts (Pair)

Camber Plate - E39 M5 (Pair)

E46M3 Racing Swaybar Set (Front & Rear)

Complete Coilover Kit, E46 Race/Track - Completely Assembled

BMW Race Mount (Pair)

This is...

official source for the best in suspension systems.

Sway Bar End Link, Adjustable (Pair)

Coilover Conversion kit, 02- Acura RSX

Camber/Caster Plates
BMW E90 ( 2006-Up 3 Series) (Pair)

MZ4 (not regular Z4) Track School Kit Plus

Honda Mount - Race (pair)

or concerns?

Call us at:

(Mon.- Fri.
9am to 5pm pst)

Click items
for more info.

Want Custom Colors???
Click here
for more info.