MY ACCOUNT
  Email Address:
 
  Password:
 
 
  Forgot Password?
MotorSites.com - Motorsport and Racing Website Design
Like us on Facebook

Camber/Caster Plate, Z Car (Pair)
Product SKU #CCPZ
Camber/Caster Plate, Z Car (Pair)
Click for larger image
regular price: $399.00
Our Price: $349.00 per Pair


 Quantity





Availability: usually ships in 48 hrs.

 


 


Ground Control Racing Camber / Caster Plates

Adds camber and caster adjustment, 100% aircraft bearings. (front and rear fitment available)

This kit is designed to bolt into the Z, and no welding is required*. The reason for this is that the Z cars have several layers of sheetmetal in the strut tower, so any welding in the strut area is bad engineering practice.

Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product.

Camber and caster are separately adjustable by sliding the mounts, without removing any components from the car. The priority of this design is to allow fast, repeatable alignment changes at the track.

The Ground Control camber plates feature two sets of bearings, a proprietary bearing, made to our specs by Aurora in the USA, which allows for articulation of the shock shaft. This spherical bearing is very understressed, as the Ground Control design does NOT support the weight of the car on the spherical bearing. Instead, the weight of the car is supported by a completely separate articulating needle bearing, which is also manufactured for Ground Control in the USA.

*There is NO welding required for the GC Z camber/caster plates, because the Z cars are one of the very worst cars to weld on (lots of undercoating between several layers of sheet metal).

There IS drilling and cutting involved. The camber plate and strut tower area on Z cars is pretty complicated, so we actually designed the GC camber/caster plate to be easy to install as part of the original design parameters. One example is that the mounting holes can be drilled without removing the front fenders. Many other Z camber plates require the front fenders to be removed in order to drill under the flange that protrudes into the engine bay.

Essentially what is done is that a series of holes are drilled according to the directions, and then the holes are "connected" with a jigsaw. The resulting cutout is the area in which the camber and caster are adjusted (left-right, front-rear).


Official Ground Control T-Shirt
Official Ground Control T-Shirt
$18.00
Regularly: $24.00




All Ground Control products carry a lifetime guarantee against defects when installed and maintained correctly. We strongly recommend that all of our products be installed by a competent, qualified mechanic.


  F.A.Q.   Contact Us   |   Privacy Policy   Terms and Conditions   Webmaster  


Phone: 530-677-8600 | Fax: 530-677-9090 | Hours: M-F 9-5 PST

"Ground Control" is a registered trademark of Ground Control Systems Inc.




Welcome to
Ground
Control
Store.com


THE Suspension Specialists!


Specials


Honda Tech Special Kit



E39 M5, Complete Coilover Kit



2005-up Mustang Street Camber Plate (Pair)



M Coupe - Full Coilover Kit



924/944/951/968 Double-Adj. Complete Strut Assemblies w/Rear C/O Shocks - Kit #8



Ground Control
for ALL your
suspension
needs...

Period.




88-00 Civic, 90-01 Integra upper mounts (Pair)



Camber Plate - E39 M5 (Pair)



E46M3 Racing Swaybar Set (Front & Rear)



Complete Coilover Kit, E46 Race/Track - Completely Assembled



BMW Race Mount (Pair)



This is...

Ground-Control-Store.com

your
official source for the best in suspension systems.




Sway Bar End Link, Adjustable (Pair)



Coilover Conversion kit, 02- Acura RSX



Camber/Caster Plates
BMW E90 ( 2006-Up 3 Series) (Pair)



MZ4 (not regular Z4) Track School Kit Plus



Honda Mount - Race (pair)



Questions
or concerns?


Call us at:
530-677-8600


(Mon.- Fri.
9am to 5pm pst)


Click items
for more info.


Want Custom Colors???
Click here
for more info.