Ground Control racing caster / camber plates. Not intended for Street/Touring vehicles. (please see "cpe30touring")
For maximum caster/camber adjustment, trimming of the strut towers may be necessary
When choosing a spring diameter (in the drop down above), please note that keeping the stock spring diameter will not work with these plates. For stock springs, use our Spec E30 plates or our E30 Touring plates.
Ground Control Racing Camber / Caster Plates
This new design comes with even more camber adjustment than stock, is even easier to adjust at the track. It also features an engraved index for quick and repeatable adjustments. This plate also includes caster adjustment, aircraft bearings, and has zinc plated steel reinforcement. Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product.
These caster/camber plates have the most amount of adjustment of any currently available. The priority of this design is to allow fast, repeatable alignment changes at the track.
The Ground Control camber plates feature two sets of bearings, a proprietary bearing, made to our specs by Aurora in the USA, which allows for articulation of the shock shaft. This spherical bearing is very understressed, as the Ground Control design does NOT support the weight of the car on the spherical bearing. Instead, the weight of the car is supported by a completely separate articulating needle bearing, which is also manufactured for Ground Control in the USA.